Low-velocity impact performance of integrally-3D printed continuous carbon fibre composite sandwich panels

Itxaro Sukia, U. Morales, A. Esnaola, Jon Aurrekoetxea, Borja Erice

Materials letters (General ed.), 2024

An automatic thermo-mechanical testing apparatus for metal forming applications

J. Agirre, D. Abedul, E. Saenz de Argandoña, N. Otegi, L. Galdos, B. Erice

International Journal of Impact Engineering, vol. 182, 2023

Effect of near beta-transus forging parameters on the mechanical and microstructural properties of Ti-6Al-4V – Application to hammer forging

J. Agirre, B. Erice, P. Arrese, N. Otegi, L. Galdos

Materials Research Proceedings, vol. 28, 2023, pp. 675-682

A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

Y. Chen, K. Liu, Z. Xu, H. Liu, M. Lißner, B. Erice, N. Petrinic

Composites Part B: Engineering, vol. 261, 2023

A mechanistic-finite element hybrid approach to modelling cutting forces when drilling GFRP-AISI 304 stacks

F. Ducobu, T. Beuscart, B. Erice, M. Cuesta, B. Lauwers, P.-J. Arrazola

CIRP Annals, vol. 72, 2023, pp. 69-72

Anisotropic plasticity and fracture modelling of cold rolled AA5754

B. Erice, B. Rolfe, J. Mendiguren

Engineering Fracture Mechanics, vol. 289, 2023

Modelling the Non-linear fibre and matrix dominated compressive behaviour in unidirectional Fibre-reinforced composites

B. Erice, D. Thomson

Composite Structures, vol. 304, 2023

An integrated inverse numerical–experimental approach to determine the dynamic Mode-I interlaminar fracture toughness of fibre composites

S.A. Ponnusami, H. Cui, B. Erice, M. Lißner, M. Pathan, N. Petrinic

Composite Structures, vol. 293, 2022

Fracture mechanisms in largely strained solids due to surface instabilities

B. Erice, M.J. Pérez-Martín, M. Kristoffersen, D. Morin, T. Børvik, O.S. Hopperstad

International Journal of Solids and Structures, vol. 199, 2020, pp. 190-202

On the dynamic response of adhesively bonded structures

M. Lißner, E. Alabort, B. Erice, H. Cui, B.R.K. Blackman, N. Petrinic

International Journal of Impact Engineering, vol. 138, 2020

Multi-material adhesively bonded structures: Characterisation and modelling of their rate-dependent performance

M. Lißner, B. Erice, E. Alabort, D. Thomson, H. Cui, C. Kaboglu, B.R.K. Blackman, M. Gude, N. Petrinic

Composites Part B: Engineering, vol. 195, 2020

Crystal-plasticity-finite-element modeling of the quasi-static and dynamic response of a directionally solidified nickel-base superalloy

R. Sancho, J. Segurado, B. Erice, M.-J. Pérez-Martín, F. Gálvez

Materials, vol. 13, 2020, pp. 1-15

Strain-rate and off-axis loading effects on the fibre compression strength of CFRP laminates: Experiments and constitutive modelling

D. Thomson, G. Quino, H. Cui, A. Pellegrino, B. Erice, N. Petrinic

Composites Science and Technology, vol. 195, 2020

Predictions of the mechanical properties of unidirectional fibre composites by supervised machine learning

M.V. Pathan, S.A. Ponnusami, J. Pathan, R. Pitisongsawat, B. Erice, N. Petrinic, V.L. Tagarielli

Scientific Reports, vol. 9, 2019

Experimental determination of the dynamic fracture-initiation toughness of high-strength metals

M.J. Perez-Martin, B. Erice, F. Galvez

Engineering Fracture Mechanics, vol. 205, 2019, pp. 498-510

Stress-state and strain-rate dependent ductile fracture of dual and complex phase steel

B. Erice, C.C. Roth, D. Mohr

Mechanics of Materials, vol. 116, 2018, pp. 11-32

On the Rate-dependent Plasticity Modelling of Unidirectional Fibre-reinforced Polymeric Matrix Composites

B. Erice, D. Thomson, S.A. Ponnusami, M.V. Pathan, N. Petrinic

EPJ Web of Conferences, vol. 183, 2018

A rate dependent experimental and numerical analysis of adhesive joints under different loading directions

M. Lißner, E. Alabort, B. Erice, H. Cui, N. Petrinic

European Physical Journal: Special Topics, vol. 227, 2018, pp. 85-97

Experimental characterisation of rate-dependent compression behaviour of fibre reinforced composites

M.V. Pathan, B. Erice, S.A. Ponnusami, N. Petrinic

EPJ Web of Conferences, vol. 183, 2018

A Wedge-DCB Test Methodology to Characterise High Rate Mode-I Interlaminar Fracture Properties of Fibre Composites

S.A. Ponnusami, H. Cui, B. Erice, M.V. Pathan, N. Petrinic

EPJ Web of Conferences, vol. 183, 2018

Evaluating the effect of matrix voids and interface flaws on the mechanical behaviour of fiber composites

S.A. Ponnusami, M.V. Pathan, B. Erice, N. Petrinic

AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2018, 2018

A Puck-based localisation plane theory for rate- and pressure-dependent constitutive modelling of unidirectional fibre-reinforced polymers

D.M. Thomson, B. Erice, H. Cui, J. Hoffmann, J. Wiegand, N. Petrinic

Composite Structures, vol. 184, 2018, pp. 299-305

Effect of pre-existing microstructural defects on elastic and fracture properties of composites

S.A. Ponnusami, M.V. Pathan, B. Erice, N. Petrinic

ICCM International Conferences on Composite Materials, 2017-August, 2017

Experimental and numerical study of strain-rate effects on the IFF fracture angle using a new efficient implementation of Puck's criterion

D.M. Thomson, H. Cui, B. Erice, J. Hoffmann, J. Wiegand, N. Petrinic

Composite Structures, vol. 181, 2017, pp. 325-335

Numerical analysis of high strain rate failure of electro-magnetically loaded steel sheets

B. Erice, D. Mohr

EPJ Web of Conferences, vol. 94, 2015

On loading velocity oscillations during dynamic tensile testing with flying wheel systems

B. Erice, C. Roth, G. Gary, D. Mohr

EPJ Web of Conferences, vol. 94, 2015

A rate-dependent Hosford-Coulomb model for predicting ductile fracture at high strain rates

S.J. Marcadet, C.C. Roth, B. Erice, D. Mohr

EPJ Web of Conferences, vol. 94, 2015

A coupled elastoplastic-damage constitutive model with Lode angle dependent failure criterion

B. Erice, F. Gálvez

International Journal of Solids and Structures, vol. 51, 2014, pp. 93-110

An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy

B. Erice, M.J. Pérez-Martín, F. Gálvez

International Journal of Impact Engineering, vol. 69, 2014, pp. 11-24

A novel method for measuring the dynamic fracture-initiation toughness under impulsive loadings

M.J. Pérez-Martín, B. Erice, D.A. Cendón, F. Gálvez

Proceedings - 28th International Symposium on Ballistics, BALLISTICS 2014, vol. 1, 2014, pp. 211-219

Numerical simulation of tangling in jet engine turbines

D.A. Cendón, B. Erice, F. Gálvez, V. Sánchez-Gálvez

International Journal of Turbo and Jet Engines, vol. 29, 2012, pp. 269-282

Cast-in-pair blade release simulation and comparison to experiments with a full scale RIG

E. Cristóbal, S. Moñux, C. Cerezo, D. Cendón, F. Galvez, B. Erice

Proceedings of the ASME Turbo Expo, vol. 7, 2012, pp. 49-56

Flow and fracture behaviour of FV535 steel at different triaxialities, strain rates and temperatures

B. Erice, F. Gálvez, D.A. Cendón, V. Sánchez-Gálvez

Engineering Fracture Mechanics, vol. 79, 2012, pp. 1-17

Effect of the temperature, strain rate and microstructure on flow and fracture characteristics of Ti-45Al-2Nb-2Mn+0.8vol.% TiB 2 XD alloy

B. Erice, M.J. Pérez-Martín, D.A. Cendón, F. Gálvez

European Physical Journal: Special Topics, vol. 206, 2012, pp. 3-14

Spalling uniaxial strength of Al 2O 3 at high strain rates

M.J. Pérez-Martín, B. Erice, D.A. Cendón, F. Gálvez

European Physical Journal: Special Topics, vol. 206, 2012, pp. 117-128

A new plasticity and failure model for ballistic application

S. Chocron, B. Erice, C.E. Anderson

International Journal of Impact Engineering, vol. 38, 2011, pp. 755-764

An experimental and numerical study of ballistic impacts on a turbine casing material at varying temperatures

B. Erice, F. Gálvez, D.A. Cendón, V. Sánchez-Gálvez, T. Børvik

26th International Symposium on BALLISTICS, 2011

An experimental and numerical study of ballistic impacts on a turbine casing material at varying temperatures

B. Erice, F. Gálvez, D.A. Cendón, V. Sánchez-Gálvez, T. Børvik

Journal of Applied Mechanics, Transactions ASME, vol. 78, 2011

Blast response analysis of reinforced concrete slabs: Experimental procedure and numerical simulation

G. Morales-Alonso, D.A. Cendón, F. Gálvez, B. Erice, V. Sánchez-Gálvez

Journal of Applied Mechanics, Transactions ASME, vol. 78, 2011

Mechanical behavior of fv535 steel against ballistic impact at high temperatures

B. Erice, F. Galvez, D. Cendon, V. Sanchez-Galvez

25th International Symposium on Ballistics, ISB 2010, 2010, pp. 1087-1095